Hardware Reference Manual
6.3.6
USB Interface
SDA660 supports one USB2.0 high speed and one USB3.1 (type C) Super speed Port with display port
and USB2.0 out of them one USB2.0 comes to IO card through B2B connector. USB3.1 (Type C) use as
ADB port and data port during OTG pen drive connection.
Pinout Specification for the J13 are below,
Pin Number
J13.A1
J13.A2
J13.A3
J13.A4
J13.A5
J13.A6
J13.A7
J13.A8
J13.A9
J13.A10
J13.A11
J13.A12
J13.B1
J13.B2
J13.B3
J13.B4
J13.B5
J13.B6
J13.B7
J13.B8
J13.B9
J13.B10
J13.B11
Version 1.0
Figure 14
–
SBC USB 3.1 Connector (J13)
Net Name
GND
USB3_SS_TX0_CONN_P
USB3_SS_TX0_CONN_M
USB_VBUS_CONN
USB3_CC1_CONN
USB3_HS_CONN_DP
USB3_HS_CONN_DM
USB3_SBU1
USB_VBUS_CONN
USB3_SS_RX1_CONN_M
USB3_SS_RX1_CONN_P
GND
GND
USB3_SS_TX0_CONN_P
USB3_SS_TX0_CONN_M
USB_VBUS_CONN
USB3_CC2_CONN
USB3_HS_CONN_DP
USB3_HS_CONN_DM
USB3_SBU2
USB_VBUS_CONN
USB3_SS_RX1_CONN_M
USB3_SS_RX1_CONN_P
Pin Function
Ground
USB Super Speed Transmit Signal Positive
USB Super Speed Receive Signal Negative
USB 5V Supply
USB CC1 (Configuration channel)
USB High Speed Signal Positive
USB High Speed Signal Negative
Sideband use (SBU)
USB 5V Supply
USB Super Speed Receive Signal Negative
USB Super Speed Receive Signal Positive
Ground
Ground
USB Super Speed Transmit Signal Positive
USB Super Speed Receive Signal Negative
USB 5V Supply
USB CC2 (Configuration channel)
USB High Speed Signal Positive
USB High Speed Signal Negative
Sideband use (SBU)
USB 5V Supply
USB Super Speed Receive Signal Negative
USB Super Speed Receive Signal Positive
- 50 -
eInfochips Confidential