Table of Contents
Advertisement
Step 2: Hook one end of the Pull-Back Ram to the object to be moved and the other
end to a stable base as shown in Figure 3. A chain or strap may be used on
either side to provide a hooking surface. Make sure the chain or strap is rated
to support the pulling weight.
Step 3: Slowly provide pressure to the Pull-Back Ram. Use caution; watch for damage
to stressed areas and ensure personal safety at all times.
6. Do not operate with loose clothing and jewelry;
7. Use protective glasses;
Step 4: When the object has reached the desired position, make sure it is stable and
8. When working with the appliance - adopt a comfortable posture.
slowly release pressure to the Pull-Back Ram. If the object is not stable, affix it
9. Method Used hydraulic razpavachka on a stationary, dry and stable surface;
in place before releasing pressure to the Pull-Back Ram.
10. Always after working with hydraulic. razpavachka, close the intake valve;
11. When you finish using the device, place protective caps, and thereby prevent the dust from the
hydraulic system;
12. Do not place objects in the hydraulic system;
13. Keep the device clean and protected from the sun and others. weather conditions place;
14. Do not use hydraulic razpavachka, fatigue or if you are under the influence of alcohol or drugs;
15. Do not allow unqualified personnel to operate the instrument;
16. Do not make modifications to the instrument;
SKU 33611
For technical questions, please call 1-800-444-3353.
17. Keep the device clean to ensure quality of work;
18. In need of repaired appliance contact the service company listed in Annex (see. Warranty Card)
19. Do not repaired appliance yourself (see. Warranty);
Attention! This instruction manual does not cover completely the probabilities that may occur due to
improper operation of the unit!
SUPPORT
Keep the device in a dry place like the position of the pump and shoulders are completely dissolved.
Permanent check shoulders and pump housing for signs of corrosion and damage.
Periodically clean the body of the appliance using a cotton cloth and machine oil.
Attention! Never Use the sandpaper or other abrasives to clean the hull.
Remove the plug to check the hydraulic oil level.
Attention! Do not use liquid hydraulic oil than specified by the manufacturer.
(See. The warranty conditions)
To ensure the reliability and ensure a longer life of the hydraulic razpavachka, replace hydraulic oil
at least once a year!
To perform the oil change is needed to develop plug and drain the oil into a suitable container.
After replacing hydraulic maslko, reinstall the plug.
Once you have performed the above guidelines should expel the air from the hydraulic system.
Release valve clockwise - about turnover, and a half. Pump using the pump handle around 10-20
times.
Keep all moving parts well lubricated. Using a high quality lubricating oil, coat the ram (#23) before
every use.
Occasionally the RAM will need to be purged of air (bled). The symptoms will
figure 3 — connecting chain and strap
and ensure personal safety at all times.
- When the object has reached the desired
position, make sure it is stable and slowly
release pressure to the Pull-Back Ram.
If the object is not stable, affix it in place
before releasing pressure to the Pull-Back
Ram
SAFETY RULES
1. The maximum load of the hydraulic ram
is 10 tons. Do not exceed the capacity of
the device!
2. When external tubes are used - nominal
capacity reaches 50% for each tube;
3. Do not exceed the rated capacity;
4. Do not use this unit for lifting vehicles;
5. Keep children away from the work area;
Page 4
9
Advertisement
Table of Contents
