Table of Contents
Advertisement
8
www.raider.bg
ATTENTION!
Read this manual carefully for your own safety before attempting to ekspoloatatsiya appliance!
SAFETY INSTRUCTIONS
When working with the unit always follow these instructions for use and attached to the equipment
"General safety rules".
In this manual, following symbols are used:
ATTENTION!
Risk of injury or damage to the instrument.
ATTENTION!
Before starting work with the tool familiarize yourself with the instructions.
Attention!
Meet the instruction manual before using the device.
Attention! Use the machine according to the work for which it is intended. Do not overload! Keep this
guide!
METHOD OF OPERATION
This hydraulic pull back ram can be used vertically or horizontally. Pull, bend or straighten metal/all
steel construction.
Your Pull-Back Ram is designed to be used with a hydraulic pump and hydraulic hose.
When unpacking your Pull-Back Ram, check to make sure the following parts are included.
Connect the hydraulic ram with the conclusion of the pump. Make sure you have a stable
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
relationship between them, before moving to pump.
cover of this manual.
Attention!
item # description
Check before each use. Do not use in the presence of cracks in the hull or other mechanical
1
Pull-Back Ram
damage.
2
End Plug
- Release the intake valve.
3
Female End Hook (attached to Ram)
- Carefully release valve clockwise srelka.
4
Male End Hook (attached to Ram)
- Adjust the hydraulic ram;
Important! The pump can be used in various positions from horizontal to vertical. Always keep the
hoses to pump down where not horizontally!
- With pump handle not adjust succumb to pressure;
Your Pull Back Ram is designed for pulling up to 10,000 pounds. Never exceed the maximum
- Once you're done slowly and carefully close the valve counter-clockwise;
weight for the Pull-Back Ram as it may damage the equipment and cause serious injury.
- Close the intake valve;
Pull-Back Ram and Hydraulic pump assembly
Your Pull-Back Ram is designed to be used with a hydraulic pump that and hydraulic hose
- Unscrew and save the end plug (#1) located on the end of the Pull-Back
may be purchased separately from Harbor Freight.
Ram coupler
- Securely screw the Hydraulic Pump Hose into the Pull Back Ram coupler
- Its hooks will turn to accept hooking from different angles.
- Position the Hydraulic Pump on a stable surface close to the pulling area.
pull-bAcK rAM and HydrAulic puMp Assembly
- Hook one end of the Pull-Back Ram to the object to be moved and the other end to a stable base.
A chain or strap may be used on either side to provide a hooking surface. Make sure the chain or
Step 1: Unscrew and save the END PLUG (#14) located on the end of the Pull-Back
strap is rated to support the pulling weight.
Ram COUPLER (#16) as shown in Figure 1.
- Slowly provide pressure to the Pull-Back Ram. Use caution; watch for damage to stressed areas
Figure 1 — Removing End Plug
unpAcKing
OVerView
AsseMbly
(#1)
Qty
1
1
1
1
Figure 2 — Connecting Hose
(#2)
Advertisement
Table of Contents
