MPC-E Module Panel Mount Installation
MPC-E modules are designed for assembly systems where one ultrasonic generator is sequenced
to as many as 8 ultrasonic probes.
The MPC-E module is typically supplied as a stand-alone bench-top unit, or as a component
that can be mounted in a through-panel configuration.
No special installation is needed for a stand-alone MPC-E module that can be put on a bench
top or a shelf.
Use the following installation recommendations for a panel mounted MPC-E module.
Cut Outs
For panel mounted modules, use Figure 1-1 below to determine the size of the cut needed for
your equipment panel.
Make the appropriate cut and install the MPC-E module securing the mounting flange to the
equipment panel before continuing with the cable connections.
Figure 1-1 MPC-E Module Cutout Guide
4
iQ Series, MPC-E User's Manual