Pairing With Iq Commander Tm - Dukane iQ Series Quick Start Manual

Pairing with iQ Commander
Connect the Windows PC with iQ Commander installed to the USB port of the iQ Auto Plus using a
standard USB cable (Dukane part number 200-1906). Connect the Ethernet port of the iQ Auto Plus
to the NET I/O port of the MPC-E using a shielded CAT 5e or better Ethernet cable (Dukane part
number 200-1961-XXX).
igate to the "Communications" tab in iQ Commander
1. Nav
2. In the "Communications" tab click on the "Net IO" button.
3. In the "Network Input/Output Configuration" pop-up window click on the "Pair / Settings"
button.
4. In the "Netio Partner Settings" pop-up window click on the "Make Pair" button.
5. A "Pairing succeeded" pop-up should appear, click on the OK button in the pop-up.
6. In the "Netio Partner Settings" pop-up window, click on the "Close" button.
7. In the "Network Input/Output Configuration" window under the "Status" column should show
"CONNECTED" with a green background for the pair.
8. Wait about ten seconds and then click on the "Refresh All" button in the "Network Input/Output
Configuration" window.
9. Verify the "Status" column shows "CONNECTED" with a green background for the pair.
10. Close the "Network Input/Output Configuration" pop- up window by clicking "OK" in the
pop-up or the "x" in the upper-right of the pop-up.
iQ Series, MPC-E User's Manual
TM
TM
.
18