Installing Iq Commander Tm - Dukane iQ Series Quick Start Manual

Installing iQ Commander
Below is a link to download the software:
http:/ /update.dukane.com
1. Download the installation file from
the PC.
2. Double-click on the installation file.
3. Once prompted, click on "Next >" on the "Welcome to the InstallShield Wizard for iQ Commander"
page. The executable will start the installation process.
4. When the progress bar is nearly full, a new window will appear asking to install the FTDI CDM
Drivers. This window may appear behind the iQ Commander
CDM Driver window is not visible, move the iQ Commander
see the FTDI CDM Drivers installation window.
5. On the FTDI CDM Drivers installation window, click on "Extract", "Next >", accept the agreement,
"Next >", and then "Finish" to install the first set of FTDI drivers.
6. Another window will pop up asking to install another set of FTDI CDM Drivers. Repeat step 5 to
install the second set of drivers.
7. Once the drivers are installed, click on "Finish" to complete the process. The user can connect a
USB cable from the PC to the generator and start the program.
iQ Series, MPC-E User's Manual
(http:/ /update.dukane.com) and save to the desired location on
TM
TM
installation window. If the FTDI
TM
installation window to the side to
17