Port Descriptions - Dukane iQ Series Quick Start Manual

Port Descriptions

+24VDC Input Connector
This is the power input for the MPC-E module.
The "+" is the positive input for the +24V Power Supply connection.
The "-" is the negative input for the +24V Power Supply connection.
The Ground symbol under the "+24VDC" is the +24V Power Supply ground
connection.
NOTE
The external +24VDC power supply that is connected
to the MPC-E power source (+24VDC) shall be listed or
labeled with 3rd party North America marking
(UL, CSA, TUV, etc.)
USB Input Connector
Connect a Windows PC to this port using the included USB cable in order
to use Dukane's PC interface tool, iQ CommanderTM. This tool allows the
user to easily update firmware, set the MPC-E name, perform diagnostics,
and view lifetime statistics.
Net I/O Input Connector
This input is used for the Ethernet based communication between a
generator supporting the Net I/O MPC-E communication and the MPC-E.
The NET I/O input is technically a two port switch.
Do not connect both P1 and P2 into the same switch. This would be the
same as connecting the two ports of one switch into two ports of another
switch which causes conflicts.
The intention of the "NET I/O" connections is to allow daisy chaining.
The order of P1 and P2 connections is not important.
11
iQ Series, MPC-E User's Manual