Plastics Health Notice; Electrical Safety - Dukane iQ Series Quick Start Manual

System Electrical Cabling - Electrical power must be off when connecting or
disconnecting electrical cables.
Do Not Wear Loose Clothing or Jewelry - They can become caught in moving
parts.
Stay Alert - Watch what you are doing at all times. Use common sense. Do not
operate the press when you are tired or distracted from the job at hand.
Do Not Operate the Equipment - your judgement or reflexes could be impaired
while taking prescription medications. If so, do not operate the equipment.
Be familiar with warning labels and recommended activity restrictions that
accompany your prescription medications. If you have any doubt, do not
operate the equipment.

Plastics Health Notice

Certain plastic materials, when being processed, may emit fumes and/or gases
that may be hazardous to the operator's health. Proper ventilation of the
workstation should be provided where such materials are processed. Inquiries
should be made to the U.S. Department of Labor concerning OSHA regulations
for a particular plastic prior to processing with Dukane ultrasonic equipment.

Electrical Safety

Always connect the included ground wire from the PE ground of the MPC-E
to the nearest grounded metal pipe or equivalent earth ground by means of a
ground clamp.
In addition to the safety considerations, proper grounding is essential for the
effective suppression of RFI (Radio Frequency Interference).
Always connect the included ground wire from the PE ground of the MPC-E
to the nearest grounded metal pipe or equivalent earth ground by means of a
ground clamp.
iQ Series, MPC-E User's Manual
WARNING
Keep head, hands, limbs and body at
least six inches (152 mm) away from an
operating press/thruster. A vibrating,
descending horn can cause burns and/
or crushing injuries.
CAUTION
When making cable connections to
system equipment or disconnecting
cables from system equipment, make
sure electrical power to the system
is turned off, and DC power cords
are removed from their receptacles.
After the cables have been securely
connected and the connections and
cable routing checked a final time,
the power may be restored.
CAUTION
If there is any question about
grounding of your equipment and/or
its electrical power source, contact a
qualified electrician.
7