Setting Up Alerts; Pausing Run Timing; Measuring Lap Times - Casio 3506 Operation Manual

Pausing Run Timing

●
1.
While the run timing screen is displayed,
press (B).
This pauses run timing and displays the
pause menu screen.
Pause Pause menu
2.
Use (A) and (C) to select what you want to
do with the run timing data you have just
measured.
[RESUME] Resumes timing.
[SAVE] Saves data.
[DELETE] Deletes data.
3.
Press (B).
If you selected the data save option, the
●
run timing result screen will appear. To
return to the Timekeeping Mode, press
any button besides (E).
If you select the data delete option, the
●
watch returns to the Timekeeping
Mode.

Measuring Lap Times

●
1.
Start run timing.
Starting Run Timing
l
2.
Press (D).
Each press of (D) displays the elapsed
time of the current section (lap time) to
appear.
Split time, running distance
3.
Press (A) or (C) to return to the run timing
screen.
If you do not perform any button
●
operation, the watch will return to the
run timing screen automatically after
about 10 seconds.
Note
You can use G-SHOCK MOVE to
●
specify whether [SPLIT TIME] or
[DISTANCE] is displayed.
Watch Operation Guide 3506
Changing Display
Information During Run
Timing
One of three screens can be displayed during
run timing (Training Mode), and you can
specify the items you want to appear on each
screen.
This means you can configure a screen with
the items you want to monitor and display that
screen while you train.
Specifying the Screen to be Displayed
l
During Running (RUN FACE)
You can navigate between display screens by
pressing (A).
Example:

Setting Up Alerts

You can use G-SHOCK MOVE to specify alert
intervals to keep you informed of your calories
burned and elapsed time while training. Then,
the watch will perform a sound and/or vibration
alert operation whenever an alert interval
value is reached while you are training. Use
watch operations to enable or disable alerts.
Lap time
Specifying the Alert Interval (Target Alert)
l
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
This displays the Training Mode screen.
3.
Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4.
Use (A) and (C) to move the pointer to
[ALERT].
5.
Press (B).
6.
Use (A) and (C) to select the item whose
setting you want to change.
[CALORIES] Calories burned
[TIME 1] Time 1
[TIME 2] Time 2
7.
Press (B).
8.
Use (A) and (C) to select an alert setting.
[OFF] Disabled
[ON (REPEAT)] Enabled (repeat)
[ON (1 TIME)] Enabled (one time)
While [ON (REPEAT)] is selected, an
●
alert operation is performed whenever
an alert interval value is reached.
9.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the alert setting
screen will re-appear.
If you want to configure settings for
●
another item, repeat steps 6 through 9.
10.
Press (D) twice to exit the setting screen.
Important!
To specify the alert interval for each
●
item, use G-SHOCK MOVE. Note that
you cannot configure settings using
watch operations.
Note
You can also use G-SHOCK MOVE to
●
enable or disable alerts.
22