Specifying The Calorie Display Unit; Screen Off Function; Resetting Watch Settings - Casio 3506 Operation Manual

Specifying the Calorie
Display Unit
You can select either calories (cal) or joules
(J) as the calories burned unit.
Important!
When Tokyo (TOKYO) is the Home
●
City, the unit is fixed as calories (cal)
and cannot be changed.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[UNIT].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[CALORIES].
6.
Press (B).
7.
Use (A) and (C) to select the calorie unit
you want.
[CALORIE] Calories
[JOULE] Joules
8.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the unit setting
screen will re-appear.
9.
Press (D) twice to exit the setting screen.
Watch Operation Guide 3506

Screen Off Function

To prevent screen burn in, this function turns
off the display when the watch is removed
from the wrist and not being used at the time
of day specified with G-SHOCK MOVE.
Any one of the events below will turn the
●
display back on.
Wearing the watch
ー
Operating a button
ー
Elapse of three hours
ー
Note
G-SHOCK MOVE can be used to
●
specify the screen off trigger time. Note
that you cannot configure this setting
using watch operations. The initial
factory default setting is 2:00 a.m.

Resetting Watch Settings

This section explains how to return the watch
settings below to their initial factory defaults.
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
●
Profile
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[RESET ALL SETTINGS].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to
[EXECUTE].
To cancel the reset operation, move the
●
pointer to [CANCEL].
6.
Press (B).
7.
Use (A) and (C) to move the pointer to
[YES].
To stop the reset operation, move the
●
pointer to [NO].
8.
Press (B).
A few seconds after the reset operation is
complete, the Timekeeping Mode setting
screen will re-appear.
9.
Press (D) to exit the setting screen.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
31