Auto Time Adjustment; Press (B); Navigating Between Modes - Casio 3506 Operation Manual

2. Y
Follow the instructions on the display to
advance to the initial setup screen.
This will display a message telling you to
connect with the watch.
If your phone is already paired with
●
another watch
On the menu bar, tap "More".
A Y
Tap "Watch".
B Y
Tap "Manage".
C Y
Perform the operation shown on
D Y
the screen to prepare to add a new
watch.
3. X
Enter the Timekeeping Mode.

Navigating Between Modes

l
4. X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
5. X
Use (A) and (C) to move the pointer to
[PAIRING].
6. X

Press (B).

7. X
Use (A) and (C) to move the pointer to
[CONNECT].
8. X
Press (B).
9.
Move the phone to be paired with close to
(within one meter of) the watch.
10. Y
When the watch you want to pair with
appears, follow the instructions on the
display to pair with it.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
If pairing fails for some reason, the
●
watch will return to the state in step 5 of
this procedure. Perform the pairing
procedure again from the beginning.
Pairing started. Pairing complete.
Watch Operation Guide 3506
Note
The first time you start up G-SHOCK
●
MOVE, a message will appear on your
phone asking if you want to enable
location information acquisition.
Configure settings to allow
background use of location
information.

Auto Time Adjustment

Your watch can connect with your phone to
adjust the watch's time setting.
If you leave your watch in the Timekeeping
Mode, it will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
While G-SHOCK MOVE is not
ー
running on the phone
Note
If there is a World Time City specified
●
with G-SHOCK MOVE, its time will
also be adjusted automatically.
Auto time adjustment is performed at
●
the times described below.
After your phone's time zone or
ー
summer time setting is changed
After 24 hours or more have passed
ー
since the last time adjustment using
Bluetooth connection
After 24 hours or more have passed
ー
since the last home city change or
time adjustment using watch
operation
The watch remains connected with
●
your phone even after time adjustment
is complete.
If time adjustment fails for some
●
reason, [CONNECT FAILED] will
appear.
Watch operation can be performed
●
even while it is connected with your
phone.
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Using the Watch in a Medical
l
Facility or Aircraft
11