Table of Contents
Advertisement
5.
Use (A) and (C) to move the pointer to
[DST].
6.
Press (B).
7.
Use (A) and (C) to select a summer time
setting.
The watch switches between
[AUTO]
standard time and summer time
automatically.
The watch always indicates
[OFF]
standard time.
The watch always indicates
[ON]
summer time.
8.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the World Time
setting screen will re-appear.
9.
Press (D) twice to exit the setting screen.
Note
The initial factory default summer time
●
setting for all cities is [AT (AUTO)]. In
many cases, [AT (AUTO)] lets you use
the watch without switching manually
between summer time and standard
time.
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
Watch Operation Guide 3506
The watch performs a sound and/or vibration
operation when an alarm time is reached. You
can set up to four different alarms.
The sound and/or vibration alert operations
●
will not be performed while battery power is
low.
When snooze is enabled for an alarm, it will
●
sound every five minutes up to seven times.
Configuring Alarm Settings
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
Use (A) and (C) to move the pointer to
[ALARM].
4.
Press (B).
5.
Use (A) and (C) to move the pointer to the
alarm you want to set.
Alarm
6.
Press (B).
7.
Use (A) and (C) to select an alarm and
snooze function ON/OFF setting.
Disables alarms, disables
[OFF]
snooze.
Enables alarms, disables
[ON]
snooze.
Enables alarms, enables
[ON (SNZ)]
snooze.
The currently selected setting will be
●
indicated by a check mark (
left.
8.
Press (B).
9.
Use (A) and (C) to set the alarm hour.
10.
Press (B).
11.
Use (A) and (C) to set the alarm minute.
12.
Press (B).
13.
Use (A) and (C) to select whether or not
you want to save your current settings.
[YES]
Saves current settings.
[NO]
Discards current settings.
Returns to the alarm setting
[RETURN]
screen.
14.
Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the alarm setting
selection screen will re-appear.
Turning on an alarm causes
●
appear on the display to the right of the
time setting. If snooze is enabled, [SNZ]
also appears.
15.
Press (D) twice to exit the setting screen.
Note
To exit the alarm setting operation at
●
any point, press (D) and advance to
step 13.
) to the
to
20
Advertisement
Table of Contents
