Advertisement
Assignment
Motor starter – base plate
Wieland podis
system
Manual V 1.03 / ref. no. 00.000.0059.0 / 28.03.2001
5.2
Motor starter
5.2.1
Installation
Tools: Allen
key, width 5, screw length at least 100 mm.
The motor starters of the various podis
uniform housing which is attached in the same way for all
the variants. Place the motor starter on the base plate
and screw in position using the four captive screws (see
diagram). The torque may not exceed 4 Nm.
The motor starter may only be placed
onto the base plate if it has already been
WARNING
installed.
It is not permitted to insert and remove
the motor starters when the load is
connected.
Ensure that the motor starter is mounted
on the correct type of base plate. The first
five digits in the order numbers of the base
plate and motor starter must match (see
diagram, the base plate and motor starter
podis
MFI were selected in the example).
types have a
Advertisement
