Printing Information; Optional Infra-Red Thermal Printer; Optional Wireless Module; Printing A 'Live' Test - Kane 905 Manual

7. PRINTING INFORMATION

Supplied as accessories for the KANE905 are infra-red thermal printers.
Read the manual supplied with each printer prior to operation.
Connections to the KANE905 are detailed below:

OPTIONAL INFRA-RED THERMAL PRINTER

This does not require a cable to transmit the data but uses an infra-red
(IR) link similar to a TV remote control. The IR emitter is positioned on
the top of the KANE905 and the bottom of the printer. Ensure they are
pointing at each other and within 300 mm, with no obstructions in the
way. Data may be lost if transmission is interupted. Keep the KANE905
pointing at the printer until the printout has finished.

OPTIONAL WIRELESS MODULE

The KANE905 can communicate with a PC and mobile devices.
Compatibility with 2.1 for Android / PC.
Please see the KANE905 software tab at:
https://www.kane.co.uk/products/kane905-commercial-flue-gas-analyser
Data can either be printed from a 'live' test or from stored data. Printing
of stored data is detailed in STORING AND RETREIVING DATA.

PRINTING A 'LIVE' TEST

During a combustion test the KANE905 will print data on request. With
the analyser showing the MAIN DISPLAY press and current data
will be sent to the printer.
The display will show the
following until data transmission * * * * * PRINTING * * * * *
is complete:
KANE905 Operators Manual Page 27