System Configuration - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
Type
LPUF-21 and
FPIC
NOTE

3.4 System Configuration

This section describes the system configuration of the E8000E-X8.
Table 3-3 System configuration list of the E8000E-X8
Item
Processing unit of the
SRUA
BootROM capacity of the
SRUA
SDRAM capacity of the
SRUA
NVRAM capacity of the
SRUA
Flash capacity of the
SRUA
CF card
Switching capacity
Interface capacity
Number of LPU slots
Issue 01 (2012-11-07)
Description
LPUF-21
1-port 10GBase LAN/WAN-XFP FPIC
12-port 100Base-FX/1000Base-X-SFP FPIC
12-port 10Base-T/100Base-TX/1000Base-T-RJ45 FPIC
1-port OC-192c/STM-64c POS-XFP FPIC
4-Por 10GBase LAN/WAN-XFP FPIC
l The E8000E-X8 supports two types of SRUs: SRUA and SRU-200-A. The E8000E-X8 does not allow
mixed use of the two types of SRUs.
l The E8000E-X8 supports two types of SFUs: SFUI-40-C and SFUI-200-C. When the main control
board is SRUA, the SFUI-40-C is used. When the main control board is SRU-200-A, the SFUI-200-
C is used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Typical
Configuration
Main frequency: 1.5
GHz
8 MB
2 GB
4 MB
32 MB
2 GB
1.44 Tbit/s
240 Gbit/s
(Bidirectional)
8
3 E8000E-X8 Chassis Overview
Remarks
-
-
-
-
-
Two 1 GB CF cards
-
Three LPUF-40-As (40G) and five
SPUAs (20G) are configured.
-
Hot
Swap
Yes
No
No
No
No
No
41