Technical Specifications - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
SC/PC Optical Connector
Figure 6-17
Figure 6-17 SC/PC optical connector
The plugging/unplugging of LC/PC and SC/PC optical connector only needs an axial operation
instead of a rotation.
The operation procedures and precautions are as follows:
l
l
FC/PC Optical Connector
Figure 6-18
Figure 6-18 FC/PC optical connector
The operation procedures and precautions are as follows:
l
l

6.7.3 Technical Specifications

Table 6-24
Issue 01 (2012-11-07)
shows the appearance of the SC/PC optical connector.
Cautiously align the head of the fiber jumper with the optical interface on the optical board
and push in the fiber with proper strength.
Press the clip before pulling it out. Push in the fiber connector inward slightly, and then
pull out the connector.
shows the appearance of the FC/PC optical connector.
Cautiously align the FC/PC optical connector with the optical interface on the optical board
and push in the fiber with proper strength to avoid damaging the ceramic pipe of the optical
interface. After completely pushing in the fiber, clockwise rotate the screw cap on the outer
ring to fasten the optical connector.
Rotate the screw cap on the outer ring anti-clockwise when pulling out the fiber. When the
screw become loose, pull out the fiber with proper strength.
shows the technical specifications of the optical fiber.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Cables
138