Auxiliary Port Cable; Introduction; Structure - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
Item
Cable type
Number of
cores
Fireproof class
Available
length

6.5 Auxiliary Port Cable

This section describes the structure and technical specifications of the AUX interface cable.

6.5.1 Introduction

The AUX interface cable is used to connect the AUX interface on the Eudemon8000E to a
modem to remotely transmit the configuration data of the Eudemon8000E.
The AUX interface cable is an 8-core shielded cable. One end of the cable is an RJ45 connector
connected to the AUX interface on the MPU. The other end has DB9 and DB25 connectors,
either of which is connected to the serial interface on a computer.

6.5.2 Structure

As shown in
console interface cable.
Figure 6-13 AUX interface cable
1. Direction A 2. DB25 male connector
Issue 01 (2012-11-07)
Description
l Symmetrical twisted cable-120-ohm-
SEYVPV-0.5mm-24AWG-8core-PANTONE 430U
l Symmetrical twisted cable-100-ohm-
SEYVP-0.48mm-26AWG-8core-black
8
CM
15 m for the 120-ohm cable
3 m for the 100-ohm cable
Figure 6-13 the structure of the AUX interface cable is the same as that of the
Table 6-17 shows the pin assignment on the AUX interface cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3. Label 4. RJ45 connector
6 Cables
132