Slots Layout And Supported Boards - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description

4.3 Slots Layout and Supported Boards

This section describes slots layout and supported boards of the E8000E-X3.
Slots Layout
Figure 4-3
Figure 4-3 Slot layout on the E8000E-X3
Table 4-1
Table 4-1 Board distribution in the board cage of the E8000E-X3
Slot
Name
LPU/
SPU
MPU
Supported Boards
Table 4-2
Table 4-2 Supported boards by the E8000E-X3
Type
MPU
SPU
LPUF-40-A and
FPIC
Issue 01 (2012-11-07)
shows the slot layout on the E8000E-X3.
describes the slot layout on the E8000E-X3.
Slot Qua Slot Width
Numbe ntity
r
1 to 3 3 41 mm (1.6 inches) These slots are used to hold SPUAs or
4 to 5 2 41 mm (1.6 inches) These slots hold MPUs that work in
lists the specifications of boards supported by the E8000E-X3.
Description
MPUD
SPUA
LPUF-40-A
20-port 100/1000Base-X SFP FPIC
2-port 10GBase LAN/WAN-XFP FPIC
4-Port 10GBase LAN/WAN-XFP FPIC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 E8000E-X3 Chassis Overview
Remarks
LPUs.
1:1 backup mode.
Hot
Swap
Yes
Yes
Yes
No
No
No
71