Setting the printer up in a new location
To set up your printer configuration again:
1
Unpack all items.
2
Select a proper location for the printer. For a basic printer, or a printer with an optional finisher, allow the following
recommended amount of space around the printer:
1
50 mm (2 in.)
2
825 mm (2.7 ft)
3
418 mm (1.4 ft)
4
100 mm (4 in.)
5
1750 mm (5.8 ft)
3
Complete the setup of the printer and scanner by completing the "Setting up the printer" chapter in the Setup Guide.
4
Verify that the printer and scanner are functioning properly by printing a menu settings page.
Shipping the printer
If shipping the printer, the scanner, and any options, save the original packaging or call the place of purchase for a
relocation kit. Disassemble all the items before packing. For more information, see "Disassembling the printer from the
scanner shelf prior to the move" on page 22.
Maintaining the printer
25
Need help?
Do you have a question about the X940e and is the answer not in the manual?
Questions and answers