Before Moving The Printer; Setting The Printer Up In A New Location - Lexmark C530 Color Quality Manual

Moving the printer

Before moving the printer

CAUTION: The printer weighs 25.40 kg (56 lb); therefore, it requires at least two people to lift it safely. Use the
handholds on the sides of the printer to lift it, and make sure your fingers are not under the printer when you set it
down.
Follow these guidelines to avoid personal injury or printer damage:
•
Always use at least two people to lift the printer.
•
Always turn off the printer using the power switch before moving it.
•
Disconnect all cords and cables from the printer before moving it.
•
Remove all printer options before moving the printer.
Warning: Damage to the printer caused by improper moving is not covered by the printer warranty.

Setting the printer up in a new location

When the printer is set up, allow clearance around it as shown.
1 101.6 mm
(4.0 in.)
609.6 mm
2
(24.0 in.)
3 101.6 mm
(4.0 in.)
Moving the printer
Page 33 of 34