Symbols And Safety Instructions - AAT c-max U2 Operating Manual

10 Malfunction and trouble shooting
9.4 Replacing fuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
9.5 Safety check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
9.6 Re-use (change of operator) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
11 Warranty and liability
12 Corrective actions / product recall
1

Symbols and safety instructions

DANGER – Immediately imminent DANGER
If not avoided, this will result in death or severe physical injuries!
WARNING – Possible imminent DANGER
If not avoided, this may result in death or severe physical injuries!
CAUTION – Possible imminent danger or harmful situation
If not avoided, this may result in minor physical injuries or damage to property!
i
NOTE – Manufacturer's information
General safety instructions
i
NOTE
In the event of visual disability, this user manual can be downloaded at
www.aat-online.de/de/bda/c-max-u2
Read the user manual prior to start-up and observe the warning notices and safety instructions.
In the event of reading difficulties, training contents must be broadened verbally.
The user manual must be kept in a safe place after reading.
Contains some flammable materials. Keep away from sources of ignition.
The c-max U2 can interfere with highly sensitive electromagnetic fields of other electronic devices
(e.g. anti-theft devices).
Stability tests were performed under laboratory conditions. The c-max U2 can behave differently under
real conditions compared to laboratory tests.
Training may only be carried out by the manufacturer or authorized personnel.
CAUTION
External heat sources may cause the surface temperature to rise (e.g. sunlight)!
In such case, surfaces may inflict burns - do not touch!
34
37
37
5