Overall Dimensions; Firing Rate - Riello Gulliver BGK3 Installation, Use And Maintenance Instructions

4.4

Overall dimensions

The burner and flange dimensions are indicated in Fig. 1.
230
ø 89
12
34
4.5

Firing rate

The burner delivery must be selected within area of the diagrams
(Fig. 2). This area is called firing rates and provides the maximum
delivery of the burner in relation to the pressure in the combustion
chamber.
The work point may be found by plotting a vertical line from the
desired delivery and a horizontal line from the pressure in the
combustion chamber. The intersection of these two lines is the
work point which must lie within the firing rates.
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
- 0.2
- 0.4
4
40 45
20013962
Technical description of the burner
222
140
5
60
50 55 65
300
The firing rate area values have been obtained
considering a surrounding temperature of 20 °C,
and an atmospheric pressure of 1013 mbar (ap-
prox. 100 m above sea level) and with the combu-
WARNING
stion head adjusted as shown on Tab. A.
D9487
6
Light oil output – kg/h
70 75
Thermal power – kW
8 GB
189
106
D7217
140
168
Fig. 1
Fig. 2