Atmel AT88CK109STK3 Quick Start Manual
Hide thumbs
Also See for AT88CK109STK3:
- Hardware user's manual (38 pages) ,
- Getting started manual (10 pages) ,
- Hardware user's manual (38 pages)
Advertisement
Dear ATMEL AT88CK109STK3 customer,
Thank you for selecting the AT88CK109STK3 evaluation kit. We hope this kit will be a useful
platform as you explore the full potential of the
product family.
CryptoAuthentication
The AT88CK109STK3 is designed to be used with Atmel's JTAGICE mkII debugger, AVR
Studio developer's suite and the ATMEL Crypto Evaluation Studio (ACES). This seamless
toolchain provides a convenient and powerful environment for generating, debugging and
testing your embedded software. For more information on these and other CryptoAuthentication
development tools, visit
.
www.atmel.com/cryptokits
IMPORTANT MESSAGE!
Atmel posts frequent updates to the AT88CK109STK3 software and documentation on our web-
site. You may download the latest version for free from
.
www.atmel.com/cryptokits
Should you experience problems with this kit, please ensure that you have downloaded and
installed the latest software version before contacting an Atmel sales representative.
Thank you for your interest in ATMEL CryptoAuthenticaton products.
Advertisement
Table of Contents
Related Manuals for Atmel AT88CK109STK3
Summary of Contents for Atmel AT88CK109STK3
- Page 1 Dear ATMEL AT88CK109STK3 customer, Thank you for selecting the AT88CK109STK3 evaluation kit. We hope this kit will be a useful platform as you explore the full potential of the product family. CryptoAuthentication The AT88CK109STK3 is designed to be used with Atmel’s JTAGICE mkII debugger, AVR Studio developer’s suite and the ATMEL Crypto Evaluation Studio (ACES).
- Page 2 Reading the HOST (AT88SA10HS) and CLIENT (AT88SA102) devices 1 Introduction AT88CK109STK3 Getting Started Guide AT88CK109STK3 is a CryptoAuthentication Starter Kit, which can be used as a reference design and development system for the AT88SA100, AT88SA102, and ATSA10HS products. Contents: ...
- Page 3 Installing ACES Go to www.atmel.com/cryptokits to download and install the latest ACES. Configuring the board Ensure there is a device in the HOST and CLIENT sockets. The kit is shipped with an AT88SA102 device in the CLIENT socket and an AT88SA10HS device in the HOST socket.
- Page 4 CryptoAuthentication Design Powering up the board The AT88CK109STK3 is a USB powered device. The AT88Microbase can be directly inserted into the USB port or be used with the 6” USB cable provided. Power LED Upon receiving power, the blue power LED “LEDP” will light.
- Page 5 If the following screen appears, then 1 of 3 problems exists. 1. No device in the socket 2. The wrong device is in the socket 3. The device is not seated properly Click the Read button in the SA102S Configuration Information section. The section will populate.
- Page 6 Click the Read button in the SA10HS Host Values section. The section will populate. Congratulation, your AT88CK109STK3 is up and running. See CryptoAuthentication Help shortcut on your desktop for additional information References and further information A complete reference design including schematics, Gerber files, BOM, Hardware User Guide, development and demonstration software is conveniently downloadable from the internet at www.atmel.com/cryptokits.
- Page 7 ATMEL SAHLL BE LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. No license is granted under any patent right or other intellectual property right of Atmel covering or relating to any machine, process, or combination in which such Atmel product or services might be or are used.
Need help?
Do you have a question about the AT88CK109STK3 and is the answer not in the manual?
Questions and answers