Clean Lint Filter; Load The Dryer - Whirlpool AWD712S2 User Manual And Online Warranty

Table of Contents

Advertisement

• Do not overload the dryer or dry very large items such as bed sheets or sleeping bags
because it is important to allow air to circulate in the dryer drum.
• Do not place clothing contaminated with inflammable substances, such as gasoline, cleaning
solvents, etc into the dryer. These substances may cause fire. For the same reason,
use only Airing cycle for dry rubber , foam rubber and plastic.

3.2 Clean lint filter

Clean the lint filter before every load. Otherwise, the safety disconnection mechanism could
be activated.

3.3 Load the dryer

No washing can remove oil completely.
Do not dry any item that come in contact with any type of oil (including cooking oil .
Items that contain foam, rubber or plastic must be dried on a drying rack or
by using Airing Cycle.
Failure to follow these instructions may result in fire or death.
1.
Open the door and place the clothing into the drum (place sheets in first starting with the
corner).
2.
Close the door and dry your hands.
Do not overload the dryer; clothing must be able to rotate freely.
1.
Pull the lint filter straight up.
2.
Remove lint by rolling it with your fingers.
3.
Push the lint filter firmly until it locks back into place.
For more information about cleaning, see "Dryer
care.
11
A
WARNING
Fire Hazard
m

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents