Description Of The Dryer; Reminder - Maintenance And Cleaning; Cleaning The Lint Filter - Whirlpool AZB 7570 Instructions For Use Manual

DESCRIPTION OF THE DRYER

A. Work top
B. Water container
C. Contact pin
D. Door:
To open the door, pull the handle.
To close the door, push gently until closed.
E. Filter
F. Heat exchanger
G. Heat exchanger flap

REMINDER - MAINTENANCE AND CLEANING

Before cleaning or carrying out maintenance, switch off the dryer.
AFTER EACH DRYING CYCLE
• Clean the lint filter at the end of every drying cycle.
• Empty the water container at the end of each drying
cycle.
EACH MONTH
• Clean the heat exchanger at least every month (see
"Cleaning the heat exchanger" on the next page).

CLEANING THE LINT FILTER

Depending on the model of your dryer, the lint filter can
have different shapes.
Clean the lint filter after every drying cycle, or when the
lint filter indicator lamp lights up, proceeding as follows:
A. Take the lint filter out of the dryer and carefully open
the filter.
B. Carefully remove the complete lint from the lint
screen.
When the lint filter is clean, put it back into the dryer.
Make sure that the lint filter is correctly positioned before
starting the next drying cycle.
8
A
B
A
B