Yamaha Z250D Owner's Manual page 44

w
e
q
2-8
35°
001278
701035
702035
EMU00106
Free Accelerator
To open the throttle without shifting into
either Forward or Reverse, push the free
accelerator button and turn the remote con-
trol lever.
NOTE:
8 The free accelerator button can be oper-
ated only when the remote control lever is
in the Neutral position.
8 After the button is pushed, the remote
control lever must be moved at least 35°
to begin opening the throttle.
8 After operating the free accelerator, return
the remote control lever to the Neutral
position. The free accelerator button will
return automatically to its set position.
The remote control will then engage
Forward and Reverse normally.
1 Fully-open
2 Fully-closed
3 Free accelerator
EMU01155
Throttle Friction Adjusting Screw
A friction device in the remote control box
provides adjustable resistance to movement
of the remote control lever, and can be set
according to operator preference. An adjust-
ing screw is located on the front of the
remote control box.
Resistance Screw
Increase Turn clockwise
Decrease Turn counterclockwise
w
Do not overtighten the friction adjusting
screw. If there is too much resistance, it
may be difficult to move the lever, which
could result in an accident.
E