Checking Propeller - Yamaha Z250D Owner's Manual

Hide thumbs Also See for Z250D:
Table of Contents

Advertisement

4-21
210012
602051
602036
q
w
e
r
y t
602074
EMU00388

CHECKING PROPELLER

w
You could be seriously injured if the
engine accidentally starts while you are
near the propeller.
8 Before
inspecting,
installing the propeller, remove the
spark plug caps from the spark plugs.
Also, put the shift control in Neutral,
put the main switch in the "OFF" posi-
tion and remove the key, and remove
the lanyard from the engine stop
switch. Turn off the battery cut-off
switch if your boat has one.
8 Do not use your hand to hold the pro-
peller when loosening or tightening
the propeller nut. Put a wood block
between the cavitation plate and the
propeller to prevent the propeller from
turning.
EMU00390
Propeller Checking Point
8 Check each of the propeller blades for
wear, erosion from cavitation or ventila-
tion, or other damage.
8 Check the splines for wear and damage.
8 Check for fish line winding around the
propeller shaft.
8 Check the propeller shaft oil seal for dam-
age.
EMU00976
Removing the Propeller
1) Straighten the cotter-pin 1 and pull it
out using a pair of pliers.
2) Remove the propeller nut 2, washer 3
and spacer 4.
3) Remove the propeller 5 and thrust
washer 6.
E
removing
or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lz250dZ250f

Table of Contents