Yamaha Z250D Owner's Manual page 130

3-23
EMU01576
4) Once the engine is supported with the
tilt support lever, push the power trim
and tilt switch "DN" (down) to retract the
trim rods.
cC
Be sure to retract the trim rods com-
pletely during mooring. This protects the
rods from marine growths and corrosion
which could damage the power trim and
tilt mechanism.
EMU00303
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch "UP" until
the engine is supported by the tilt rod.
2) Release the tilt-support lever.
3) Push the power trim/tilt switch "DN"
(Down) to lower the engine to the
desired position.
E