Brother ULT-2002D Operation Manual page 306

7.
This message is dis-
played when the
embroidery unit is
attached, and the
"Reverse/Reinforcement
Stitch" button is
pressed.
8.
This message is
displayed when the
embroidery unit is
attached, and or
is pressed.
9.
This message is dis-
played when you try to
combine more than 71
patterns.
10.
This message is dis-
played when you try to
use the foot controller
while the machine is in
embroidery mode.
11.
This message is dis-
played when or
is pressed while
the machine is in utility
stitch mode.
Troubleshooting
12.
This message is dis-
played when the
patterns you are editing
take up too much
memory, or if you are
editing too many
patterns for the memory.
13.
This message is dis-
played when the "Start/
Stop" button is pushed
while the foot controller
is installed.
14.
This message is dis-
played when the "Start/
Stop" button is pushed
while the machine is in
embroidery edit mode
and a pattern is being
edited.
15.
This message is dis-
played when a key on
the LCD display is
touched while the
needle is in the down
position.
16.
This message is dis-
played when the
buttonhole lever is
down, a stitch other
than a buttonhole is
selected, and the "Start/
Stop" button or the
"Reverse/Reinforcement
Stitch" button is pushed.
9-11
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —