If The Needle Does Not Catch The Fold; If The Needle Catches Too Much Of The Fold - Brother ULT-2002D Operation Manual

R
1
1

If the Needle Does not Catch the Fold

If the Needle Catches Too Much of the Fold

3-36
4. Sew the fabric, keeping the folded edge in contact with
the presser foot.
1 Needle position
5. Remove the basting stitches and turn over the fabric.
1 Wrong side of fabric
2 Right side of fabric
Blind hem stitches can not be sewn if the left needle
drop point does not catch the fold. If the needle catches
too much of the fold, the fabric can not be unfolded
2
and the seam appearing on the right side of the fabric
will be very large, leaving an unattractive finish. If you
experience either of these cases, follow the instruc-
tions below to solve the problem.
Adjust the width so that the needle slightly catches the
fold by pressing
Adjust the width so that the needle slightly catches the
fold by pressing
Sewing Utility Stitches
in the WIDTH display.
in the WIDTH display.
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —