Brother ULT-2002D Operation Manual page 64

8. Do not set the thread in the needle clamp thread guide
6
CAUTION
The needle threader can not be used. Thread the twin
needle by hand, from front to back. Using the needle
threader may result in damage to the machine.
9. Select a stitch pattern. Refer to chart on page 3-1
1
CAUTION
If the
the selected stitch can not be sewn in twin needle
mode.
10. Press
11. Start sewing.
Sample of Twin Needle Sewing
Getting Ready to Sew
on the needle bar. Thread the needle on the right side.
through 3-8 for proper presser foot "J".
key is light gray after selecting the stitch,
to select twin needle mode.
1 The appears next to the bobbin thread display.
CAUTION
Be sure to set the twin needle mode when using
the twin needle. Using the twin needle while the
machine is in single needle mode could cause the
needle to break, resulting in damage.
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
2-7