Brother ULT-2002D Operation Manual page 131

6
Darning Stitch Cycle
1 Cycle of reinforcement stitches
3-58
4. Lower the buttonhole lever so that it is positioned be-
hind the metal bracket on the buttonhole foot.
5
1 Metal bracket
6
5. Gently hold the end of the upper thread, and then press
5
the "Start/Stop" button to start the machine. Once sew-
ing is completed, the machine automatically sews re-
inforcement stitches, and then stops.
Note
If automatic thread cutting is turned on before you start
sewing, both threads are automatically cut after the rein-
forcement stitches are sewn. If the fabric does not feed
(for example, because it is too thick), increase the stitch
length setting.
Sewing Utility Stitches
1
1
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
1
9 —