Table of Contents
Advertisement
9-12
17.
This message is dis-
played when the
embroidery unit is
attached and the power
is turned on with the
needle in the down
position.
18.
This message is dis-
played when the
buttonhole lever is up, a
buttonhole stitch is
selected, and the "Start/
Stop" button or "Re-
verse/Reinforcement
Stitch" button is pushed.
19.
This message is dis-
played when there are
too many characters
and the curved charac-
ter configuration is
impossible.
20.
This message is displayed
when the machine is in
embroidery mode and the
combined character
pattern is too large for the
embroidery frame. You can
rotate the pattern 90
degrees and continue
combining characters.
21.
This message is dis-
played when there is no
stitch or embroidery
pattern selected and the
"Start/Stop" button, the
"Reverse/Reinforcement
Stitch" button, or
is pressed.
Troubleshooting
22.
This message is dis-
played when the
machine is in embroi-
dery mode, and the
character pattern
combination is too large
to fit in the embroidery
frame.
23.
This message is dis-
played when the
machine is in embroi-
dery mode and the
medium frame is
attached, and the
selected pattern does
not fit in the medium
frame.
24.
This message is dis-
played when the
machine is in embroi-
dery mode and the
small frame is attached,
and the selected pattern
does not fit in the small
frame.
25.
This message is dis-
played when the
machine is in embroi-
dery mode and the
embroidery unit tries to
initialize while the
embroidery frame is
attached.
26.
This message is dis-
played when the
machine is ready to sew
an embroidery pattern,
and the "Start/Stop"
button is pushed while
the embroidery frame is
not attached.
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
Advertisement
Table of Contents
Troubleshooting
