BMW Motorrad R 1200 GS Rider's Manual page 80

Switching on ignition (
4
78
Repeat pressing button 1
z
briefly, until in the top line of
SETUP ENTER
the display 2
is shown.
Press and hold button 1 to
SETUP
start the
50).
Press button 1 briefly to
respectively select the
RDC/TPC
The top line of the display 2
shows
The adjusted value appears
in the bottom line of the
menu.
display 3.
Press button 4 briefly to
change the adjusted value.
The following settings for
Enduro
ON
: the TPC warning symbol is
no longer shown on the display.
Only the tire pressure outside of
the permitted tolerance is dis-
played.
menu item.
RDC
.
RDC
are possible:
OFF
: the display warning
symbol for TPM is dis-
played; the tire pressure outside
of the permitted tolerance is also
displayed.
Install coding plug
Switch off ignition (
Remove rider's seat (
ATTENTION
Penetration of dirt and mois-
ture in the open connector
Malfunctions
51).
87).