BMW Motorrad R 1200 GS Rider's Manual page 42

Hide thumbs Also See for R 1200 GS:
Table of Contents

Advertisement

3
NOTICE
This fault message is only shown
40
for a short time immediately fol-
lowing the Pre-Ride-Check.
Possible cause:
The battery of the tire inflation
pressure sensor no longer has
its full capacity. The operation of
the tire inflation pressure control
z
is only ensured for a limited time.
Contact an authorized work-
shop, preferably an authorized
BMW Motorrad retailer.
ABS self-diagnosis not
completed
ABS indicator light flashes.
Possible cause:
ABS self-diagnosis rou-
tine not completed
ABS is not available, as the
self-diagnosis routine was not
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel speed sensors: 3 mph
(5 km/h))
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS fault
ABS indicator light lights
up.
Possible cause:
with riding modes Pro
Rotational speed sensor has
been damaged. The ABS Pro
function is not available.
ATTENTION
Damage to components
Damage to sensors, for example,
with the resultant malfunctions
Do not carry along any objects
under the rider's or passen-
ger's seat.
Secure vehicle tools.
Do not damage the rotational
speed sensor.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It remains possible to continue
riding. Observe additional in-
formation on special conditions
OE

Advertisement

Table of Contents
loading

Table of Contents