BMW Motorrad R 1200 GS Rider's Manual page 43

that can lead to an ABS error
message ( 119).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS deactivated
ABS indicator light lights
up.
Possible cause:
The ABS system was deacti-
vated by the rider.
Switch on ABS function
( 67).
ASC intervention
without riding modes Pro
ASC indicator and warning
light flashes rapidly.
ASC has detected instability at
the rear wheel and responded
by reducing the torque. The in-
dicator and warning light flashes
longer than the ASC intervention
lasts. This feature continues to
furnish the rider with visual feed-
back confirming that the system
has initiated active closed-loop
intervention even after the critical
situation has passed.
DTC intervention
with riding modes Pro
DTC indicator and warning
light flashes rapidly.
DTC has detected instability at
the rear wheel and responded
by reducing the torque. The in-
dicator and warning light flashes
longer than the DTC intervention
lasts. This feature continues to
OE furnish the rider with visual feed-
back confirming that the system
has initiated active closed-loop
intervention even after the critical
situation has passed.
ASC self-diagnosis not
completed
without riding modes Pro
ASC indicator and warning
light flashes slowly.
Possible cause:
ASC self-diagnosis rou-
OE
tine not completed
ASC is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
Ride off slowly. The ASC indi-
cator and warning light must go
out after several meters.
If the ASC indicator and warning
light continues to flash:
3
OE
41
z