BMW Motorrad R 1200 GS Rider's Manual page 132

Behavior when the vehicle is
7
rolling or slipping
If the vehicle rolls with the Hill
130
Start Control active, the holding
pressure is increased.
If the rear wheel slips, the
brake will be released again
after approx. 1 m. This
prevents the vehicle from
rolling with the rear wheel
blocked.
Releasing the brake when
stopping the engine
The Hill Start Control is deac-
tivated if the engine is stopped
using the emergency off switch
z
or if the side stand is folded out.
In addition to the indicator and
warning lights, the rider is to be
made aware about the deactiva-
tion of the Hill Start Control by
the following behavior:
Brake warning jerk
The brake is released briefly
and immediately activated
again.
This causes a jerk that the
rider can feel.
The brake is released slowly.
The vehicle is unbraked.
The rider must brake the vehi-
cle manually.
NOTICE
When the ignition is switched off,
the holding pressure is built up
immediately and without brake
warning jerk.