BMW Motorrad R 1200 GS Rider's Manual page 148

8
146
Remove spacer bushing 1 from
the wheel hub.
Installing front wheel
z
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Mount spacing bushing 1 on
left side in wheel hub.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 1.
Remove front wheel stand and
firmly compress front forks. Do
not actuate handbrake lever at
the same time.