Pull mounting plate on posi-
tion 1 outward and remove it
upward.
Slightly lift and remove battery
from holder until positive termi-
nal becomes accessible.
Remove positive battery ca-
ble 1 and pull out battery.
Install battery
NOTICE
If the 12 V battery is installed in-
correctly, or if the terminals are
swapped (e.g. when jump-start-
ing), the fuse for the alternator
regulator may blow.
Fasten positive battery cable 1.
Slide battery into holder.
First, insert mounting plate into
supports 1. Next, press it un-
der the battery at position 2.
8
159
z