BMW Motorrad R 1200 GS Rider's Manual page 47

Stop symbol flashes briefly.
Possible cause:
The Hill Start Control can not be
activated.
Fold in side stand.
Hill Start Control only functions
when the side stand is folded
in.
Start engine.
Hill Start Control only functions
with the engine running.
Upshift recommendation
The upshift recommendation
must be switched on in the
display settings ( 61).
Upshift recommendation 1 sig-
nals the economically best point
in time for upshifting.
Upshift recommendation
Up arrow is displayed.
Possible cause:
The speed for the next higher
gear was reached.
Upshift.
The arrow disappears.
Gear not programmed
with gearshift assistant Pro
The gear indicator flashes.
The gearshift assistant Pro
has no function.
Possible cause:
with gearshift assistant Pro
The transmission sensor has not
been programmed completely.
N
Shift to idle and let engine
run at least 10 seconds while
the motorcycle is stationary so
that idle can be programmed
in.
Use clutch control to shift to
all gears and drive at least 10
seconds in each gear.
The gear indicator stops flash-
ing when the transmission sen-
sor has been programmed suc-
cessfully.
If the transmission sensor has
been programmed completely,
the Pro gearshift assistant will
operate as described (
3
OE
45
OE
z
128).