Table of Contents
Advertisement
4.4. Removing the gearbox
Disconnect gearbox housing and intermediate bearing.
Remove grease. If the slipping clutch remains in the
gearbox housing when the two housings are separated, take it out at this point.
Remove circlip from gear-wheel.
Take out gear-wheel.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS
C-SC_CSSM
2012.05
Tool:
- Slotted screwdriver
- External circlip pliers
Advertisement
Table of Contents
