Table of Contents
Advertisement
5.3. Fitting the gearbox / armature
Slide plate on to armature shaft
Press on ball bearing.
Press on sealing ring.
Press ball bearing onto collector side.
Attach plastic bush along with magnet ring.
Drive in gearbox housing.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS
C-SC_CSSM
2012.05
Tool:
- Plastic hammer
- Arbor press
- Sleeves
Advertisement
Table of Contents
