Removing The Motor - Fein KBH 25 Repair Manual

Unscrew both carbon holder covers.
Pull up carbon brush and clamp firmly with spring or pull all the way out of the
carbon holder.
Unscrew screws from gearbox housing.
Pull gearbox housing out of motor housing with armature.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS

4.1. Removing the motor

C-SC_CSSM 2012.05
Tool:
- Torx 15 and 20 screwdriver