Table of Contents
Advertisement
Check motor
(without switches or electronics)
Test voltage:
1.Remove brown cable (6) and blue cable (7) on switch and connect the two.
2.Remove black cable (8) on switch and remove black cable on electronics.
Apply test voltage between the two black cables.
The motor must now run.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS
Electrical tests
100 - 120 V tools:
220 - 240 V tools:
U = 60 V / 50 Hz
U = 120 V / 50 Hz
C-SC_CSSM
2012.05
Tool:
-Isolating transformer
-Measurement terminals
Advertisement
Table of Contents
