Clamp slipping clutch in vice with aluminium jaws.
Adjust torque wrench.
The release torque for the slipping clutch must be between 5 – 6.5 Nm.
Use torque wrench to check release torque.
If release torque is higher or lower, replace slipping clutch.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS
Check slipping clutch
C-SC_CSSM
2012.05
Tool:
-2-20 Nm torque wrench
-Open-ended spanner 13 mm
-Vice with aluminium
jaws