Table of Contents
Advertisement
4.3. Removing the gearbox / armature
Drive armature out of intermediate bearing by tapping gently with a plastic hammer.
Prise off plastic bush along with magnet ring.
Pull out ball bearing.
NOTE
The plastic bush is damaged when removed and always has to be replaced.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
FEIN REPAIR TOOLS
C-SC_CSSM
2012.05
Tool:
- Plastic hammer
- Slotted screwdriver
Advertisement
Table of Contents
