Carrier SmartVu control Manual page 33

5 - USER INTERFACE: MENU STRUCTURE
ALMHIST2 – Major Alarm Historic
No. Name Date
1 Alarm YYYY/MM/DD
... Alarm YYYY/MM/DD
50 Alarm YYYY/MM/DD
*Depends on the selected language (English by default).
ALARMRST – Reset Alarms
No. Name Status
1 RST_ALM no/yes
2 ALM -
3 alarm_1c -
4 alarm_2c -
5 alarm_3c -
6 alarm_4c -
7 alarm_5c -
8 alarm_1 -
9 alarm_2 -
10 alarm_3 -
11 alarm_4 -
12 alarm_5 -
*Depends on the selected language (English by default).
IMPORTANT: JBus vs. Modbus: Data exchange services
offered by Modbus and JBus protocols are the same and
therefore these terms can be used interchangeably.
Hour
HH:MM
HH:MM
HH:MM
Displayed text*
Alarm Reset
Alarm State
Current Alarm 1
Current Alarm 2
Current Alarm 3
Current Alarm 4
Current Alarm 5
Jbus Current Alarm 1
Jbus Current Alarm 2
Jbus Current Alarm 3
Jbus Current Alarm 4
Jbus Current Alarm 5
Alarm text
Alarm text (see section 8.6)
Alarm text (see section 8.6)
Alarm text (see section 8.6)
Description
Used to reset active alarms
Alarm state:
Normal = No alarm
Partial = There is an alarm, but the unit continues to operate
Shutdown = Unit shuts down
Alarm code (see section 8.6)
Alarm code (see section 8.6)
Alarm code (see section 8.6)
Alarm code (see section 8.6)
Alarm code (see section 8.6)
JBus alarm code (see section 8.6)
JBus alarm code (see section 8.6)
JBus alarm code (see section 8.6)
JBus alarm code (see section 8.6)
JBus alarm code (see section 8.6)
33