Vitek VT-6400 BK Manual Instruction page 9

tion that temperature of channel 1 is equal or
below 2ºС.
Repetition function (with interval from 0 to 15
minutes) can be programmed for the signals
enlisted above.
a) Current time and alarm mode selection
In order to switch to this mode press buttons
«+»/«-» until the icon (
b) Setting time, date and language.
1. Press and hold button SET in current time
and alarm mode to set up current time and
calendar.
2. Day of the week starts blinking. Setting
language:
Select the language of days of the week
indication you need using buttons «+»/ «-»:
English, German, French, Italian, Spanish,
or Dutch. Press button SET to confirm input
language selection.
. Selection of city code:
Select city code using «+»/ «-» buttons.
There is list of city codes in appendix below.
Press button SET to confirm input city code
selection.
4. Setting latitude degrees (º) (if «USR» is
selected as city code):
Set value you need using buttons «+»/ «-».
Press button SET to confirm input value.
Repeat the procedure described above
for setting minutes of latitude, degree and
minutes of longitude.
5. Setting time zone (if «USR» is selected as
city code):
Set time zone using buttons «+»/«-» with
step 0 minutes. Press button SET to
confirm input value.
6. Setting summer time DST (if «USR» is
selected as city code or city is located in
DST zone)
Switch on/off DST function using buttons
«+»/«-». Press button SET to confirm input
value.
7. Repeat the operations described above for
setting year, month, calendar display format
(day/month, month/day), time display
format (12-/24 hours), local time: hours and
minutes.
. On input completion system returns to
normal mode of current time and alarm
indication.
6400IM.indd 9
Notice: in order to return to normal mode of
c) Switching between different data indication
) starts blinking.
•
•
•
•
•
d) Switching on/off sound signals of alarm
1.
-
-
-
2. During display of the alarms listed above
Notice: during alarm selection mode press
e) Setting alarm sound signals
1. Press button ALARM/CHART in current
2. Press and hold ALARM/CHART button until
. Setting alarm hours: set alarm hours using
4. Setting alarm minutes: set alarm minutes
5. Setting time of alarm signal repetition
9
ENGLISH
current time and alarm indication press and
hold button SET any time. All setting will be
reset.
in current time/calendar mode
In current time/calendar mode on every
pressing of SET button system switches
between the next parameters' indication:
Hours: minutes: day of week,
Hours: minutes: city,
Hours: minutes: seconds,
Month: day: year (or day: month: year,
depending on settings),
Hours: minutes for UTC (Universal
Coordinated Time).
clock
In current time/calendar mode on every
pressing of ALARM/CHART
switches between the next parameters'
indication:
time of every day sound signal (if the option
is off, "OFF" is displayed),
time of one-time sound signal
is off, "OFF" is displayed),
time of preset sound signal (if the option is
off, "OFF" is displayed).
pressing buttons «+»/«-» leads to switching
on/off the adequate alarm.
button SET to return to normal mode of
current time/alarm indication any time.
time/alarm mode to select alarm
parameters which you want to set up.
alarm hour digits start blinking.
buttons «+»/ «-». Press button ALARM/
CHART in order to confirm set value.
using buttons «+»/ «-». Press button
ALARM/CHART in order to confirm set
value.
(all tree alarms have the same time of
repletion):
button system
(if the option
23.01.2009 10:14:43