Chapter 2. Installation; Unpack And Inspect; Contents Of Adtran Shipments; Installing The Async-232 Module - ADTRAN Async-232 User Manual

Chapter 2

UNPACK AND INSPECT

Carefully unpack and inspect the Async-232 Module for any shipping damages. If
you suspect damage has occurred, immediately file a claim with the carrier and
then contact ADTRAN Technical Support. If possible, keep the original shipping
container for returning the Async-232 Module for repair or for verification of
shipping damage.

Contents of ADTRAN Shipments

The ADTRAN Async-232 Module shipment includes the following items:
•
•
•

INSTALLING THE ASYNC-232 MODULE

The Async-232 Module plugs into any available option slot. Figure 2-1 depicts the
action required for proper placement of the Async-232 Module, as described here:
1.
2.
3.
4.
5.
61200182L1-1
Async-232 Module
Async-232 Module User Manual (Insert into the main ATLAS Manual.)
Two DB78 to Octal DB25 Cables
Remove the cover plate from the option slot into which the Async-232 Mod-
ule will be installed (located on the ATLAS chassis rear panel).
Slide the Async-232 Module into the option slot until the module is firmly
positioned against the front of the ATLAS chassis.
Fasten the thumbscrews at both edges of the Async-232 Module.
Connect the DB78 end of the cable to the Async-232 Module, and connect the
DB25 connector to the associated devices.
Complete installation of the remaining modules and base unit, if necessary, as
specified in the Installation chapter of the ATLAS User Manual.
Async-232 Module User Manual
Installation
2-1