Schiller AT-102 Service Handbook page 49

AT-102 ECG Service Handbook
System Settings
Filter
Interpretation
Comm
Spiro
Stress
Date and Time
Article Number 2. 540 028
SCHILLER AG 2002
Baseline Filter 0.05, 0.15 or 0.30 Hz
Mains Filter 50, 60 Hz or OFF (-)
Myogram Filter 25 or 35 Hz, ON (+) or OFF (-)
SSB Filter Smoothing Filter Enabled (+) or Suppressed
(-)
SSF Filter Baseline Stabiliser Enabled (+) or
Suppressed (-)
Sensitivity Low (-) or high (+) sensitivity
A30 Patient age is assumed to be < 30 (-)
or >30 (+)
U 'Unconfirmed report' is written (+) or
suppressed (-)
Abnormal Normal / Abnormal printed Enabled (+) or
Suppressed (-)
Baud rate 115200, 57600, 38400, 28800, 14400 or 9600.
This is followed by parity setting (Y/N), bits
and number of stop bits.
Mode Line or Modem
F=f(v) Enabled (+) or Suppressed (-)
Flow =f(V) Enabled (+) or Suppressed (-)
Diagn. Enabled (+) or Suppressed (-)
PEFD (l/min) Enabled (+) or Suppressed (-)
Axis 5, 10 or 20 mm/s
Bike 900 / 911 or SECA CT100 or none
Prot 252525 or user
TM ETM435/TM4000ES or RAM 770CE or MTM-
1500 or none
Prot Bruce or user
BP Manual, automatic of none
Stage Print leads and format
ST Lead Defined lead for ST Measurement
J- Point J plus 20ms, 40ms, 60ms, or 80ms
System date and time, and user ID (if set)
Section 1
Operating Elements
1.31